BUCKET WITH BOLT-ON CUTTING EDGE 1,000 LLightweight bucket with a capacity of 1,000 l. Equipped with a bolt-on, reversible cutting edge for extended service life and easy replacement. Suitable for handling aggregates such as sand, gravel, expanded clay and generally any granular material. Verify required setup and software availability with the local Magni dealer.
3D-FILM HANDLER 2.5 TThe 3D-Film handler is designed for the film industry, and features a surface designed to support equipment like LED panels or light diffusers during studio and location shoots. It has a load capacity of 2,500 kg and offers a full 360° of rotation. Verify required setup and software availability with the local Magni dealer.
HOOK 7 TType-approved 360° swivel hook with safety catch, designed for handling suspended loads. Load capacity up to 7,000 kg. Metal storage support included. Verify required setup and software availability with the local Magni dealer.
BOX-SHAPED BOOM WITH TWO HOOKS 2 T – 7 TBoom with 2 integral type-approved swivel hooks with a load capacity of 2,000/7,000 kg. The innermost hook has the larger load capacity, and allows the reach to be increased by an additional 2.8 metres. Verify required setup and software availability with the local Magni dealer.
BOX-SHAPED BOOM WITH HOOK 4 TBox-shaped boom with type-approved swivel hook that extends the reach by an additional 2 metres. Ideal for lifting bulky loads of up to 4,000 kg even in hard-to-reach areas. Verify required setup and software availability with the local Magni dealer.
HOOK 6TType-approved 360° swivel hook with safety catch, designed for handling suspended loads. Load capacity up to 6,000 kg. Metal storage support included. Verify required setup and software availability with the local Magni dealer.
PIPES HANDLER 1,000 KGClamp for handling pipes, load capacity up to 1,000 kg, pipe diameter from 242 mm up to 580 mm. The clamp has three degrees of freedom; 360° rotation, +/- 150 mm sideshift, and clamp opening/closing. Verify required setup and software availability with the local Magni dealer.
TYRE HANDLER 3.8 T – 49″Tyre handler with a load capacity of 3,800 kg, ideal for handling tyres from 1,580 mm to 3,130 mm diameter. Hydraulic opening/closing, can be rotated through 360°. Non-slip forks assure that the tyre is held securely. OPT-02-022 “Double hydraulic output at the boom head”, required to use the clamp, must be ordered separately. Verify required […]
TYRE HANDLER 2.5 T – 25″Tyre handler with a load capacity of 2,500 kg, ideal for handling tyres from 1,220 mm to 2,350 mm diameter. Hydraulic opening/closing, can be rotated through 360°. Non-slip forks assure that the tyre is held securely. OPT-02-022 “Double hydraulic output at the boom head”, required to use the clamp, must be ordered separately. Verify required […]
RIBS CLAMP 4 TClamp with a load capacity of 4,000 kg, made of high-strength material, for installing supporting arch ribs in tunnel construction applications. 65° rotation and 46° tilt for precise rib installation. Verify required setup and software availability with the local Magni dealer.
