PIPES HANDLER 1,000 KGClamp for handling pipes, load capacity up to 1,000 kg, pipe diameter from 242 mm up to 580 mm. The clamp has three degrees of freedom; 360° rotation, +/- 150 mm sideshift, and clamp opening/closing. Verify required setup and software availability with the local Magni dealer.
TYRE HANDLER 3.8 T – 49″Tyre handler with a load capacity of 3,800 kg, ideal for handling tyres from 1,580 mm to 3,130 mm diameter. Hydraulic opening/closing, can be rotated through 360°. Non-slip forks assure that the tyre is held securely. OPT-02-022 “Double hydraulic output at the boom head”, required to use the clamp, must be ordered separately. Verify required […]
TYRE HANDLER 2.5 T – 25″Tyre handler with a load capacity of 2,500 kg, ideal for handling tyres from 1,220 mm to 2,350 mm diameter. Hydraulic opening/closing, can be rotated through 360°. Non-slip forks assure that the tyre is held securely. OPT-02-022 “Double hydraulic output at the boom head”, required to use the clamp, must be ordered separately. Verify required […]
RIBS CLAMP 4 TClamp with a load capacity of 4,000 kg, made of high-strength material, for installing supporting arch ribs in tunnel construction applications. 65° rotation and 46° tilt for precise rib installation. Verify required setup and software availability with the local Magni dealer.
REINFORCED BUCKET WITH BOLT-ON CUTTING EDGE, 2,000 L (TH)Robust bucket with a capacity of 2,000 l. Equipped with a bolt-on, reversible cutting edge for extended service life and easy replacement. Suitable for handling aggregates such as sand, gravel, expanded clay and generally any granular material. Verify required setup and software availability with the local Magni dealer.
HOOK 5TType-approved 360° swivel hook with safety catch, designed for handling suspended loads. Load capacity up to 5,000 kg. Metal storage support included. Verify required setup and software availability with the local Magni dealer.
SWAN-NECK BOOM WITH HOOK 3 TSwan-neck boom equipped with a type-approved swivel hook that extends the reach by an additional 1.5 metres. Ideal for handling loads of up to 3,000 kg even in confined spaces, attics and plant nurseries. Verify required setup and software availability with the local Magni dealer.
HYDRAULIC TELESCOPIC BOOM WITH HOOK 1.5 T / 2.5 TTelescopic boom with box section adjustable to two different lengths and load capacities, equipped with a type-approved swivel hook. When fully extended, the reach is increased by a further 2.7 metres with a load capacity of 1,500 kg. When used fully retracted, the reach is 1.8 metres, with load capacity increased to 2,500 kg. Verify […]
LATTICE BOOM WITH SINGLE PULL WINCH 3 TLattice boom with integral winch, extends the reach by an additional 1.7 metres. Ideal for handling light and bulky loads, even in hard-to-reach areas. Maximum capacity of 3,000 kg. Tubular structure to improve the weight/capacity ratio. The winch is equipped with a rope pressure roller and hydraulic limit switch system for rope raising/ lowering. Verify […]
LATTICE BOOM WITH SINGLE PULL WINCH 2.7 TLattice boom with integral winch, extends the reach by an additional 1.7 metres. Ideal for handling light and bulky loads, even in hard-to-reach areas. Maximum capacity of 2,700 kg. Tubular structure to improve the weight/capacity ratio. The winch is equipped with a rope pressure roller and hydraulic limit switch system for rope raising/lowering. Verify required […]
