BRANCH CUTTER RADIO CONTROL WITH SCREEN

Radio control equipped with a practical color display to visualize all geometric data of the boom from the ground, increasing operator safety. In addition to the radio control with screen, it will be possible to operate all functions of the Branch Cutter attachment (ATT-08-001). Attachment not included in the code.

It will also be possible to view the main parameters of the machine and confirm the change of attachment without having to enter the cabin.

If the machine is equipped with Remote Machine Driving Predisposition (OPT-02-012), this radio remote control will allow stabilizing and driving the telehandler remotely.

For countries where regulations require it, the Branch Cutter radio control with screen equipped with a dead man’s button (OPT-02-040) will be necessary.

Operations available from the radio control:
• power on/off
• turret rotation
• boom in/out
• boom up/down
• hare/tortoise
• emergency pump
• increase/decrease RPM
• emergency stop
• control of electrovalves at boom head
• boom extension mode M1 and M2 (RHT 6.46 only)
• remote driving management
• stabilizers up, down (automatic self-leveling stabilization)
• forward/backward
• right/left
• turret rotation
• 6 programmable function keys for additional functions

Information available on the radio control:
• radio control battery level
• machine connection indicator
• anti-tipping % indicator
• boom head valve activation indicator
• remote attachment confirmation
• machine status (alarms/engine 1st display page)
• numerical load information (extension, angle, maximum capacity, current load)

This optional is compatible with the RTH range.