RTH 17.167

The new 17.167 integrates the 3 reach modes featured on the other models in the range into a single unit, a first in the category:

• M1 – Max Outreach Mode

The RTH boom “Max Outreach Mode”, standard on all Magni rotating telescopic handlers, features a unique extension sequence, with the smaller, end sections extended first and the larger sections kept until last.

This extension mode increases both the range and the load capacity of the boom’s horizontal reach. It also provides greater load capacity at maximum height.

• M2 – Max Capacity Mode

The boom extension “Max Capacity Mode” is a leading-edge characteristic provided on RTH 17.115, 17.127 and 17.151 models. It extends the boom sections in a specific order, starting with the largest and finishing with the smallest sections.

This configuration optimises load capacity in the early stages of extension, thus enabling the boom to handle bigger loads than Max Outreach Mode. This mode is therefore ideal for operations which require lifting of heavy loads within a short operating range.

• M3 – Full Power Mode

The new “Full Power Mode” revolutionises the operation of Magni telescopic handlers, deactivating boom extension and retraction when the working position is reached in order to increase load capacity and improve operating stability. Available on 6- and 8-tonne RTH models, this feature, when combined with Magni winches or winch booms, provides load capacity performance comparable with that of off-road cranes for a given reach.

This mode allows boom extension to be blocked to reduce the impact of the dynamic forces generated by friction on the chains. In practice, extension is deactivated while rotation and lifting are still enabled, in exactly the same way as on telescopic boom cranes.

The main benefit of this function is the significant increase in load capacity, achieved by eliminating the dynamic effects generated by the boom extension system. What’s more, once these forces have been eliminated the horizontal boom can be extended further, increasing reach capacity.

With a maximum working height of 167 ft, the Magni RTH 17.167 is the world’s tallest rotating telescopic handler, offering performance that rivals that of compact off-road cranes, while retaining the unique versatility of interchangeable attachments.

The RTH 17.167 is compatible with more than 60 attachments, enabling it to satisfy the requirements of any sector, including:

• cladding panel installation using vacuum handler attachments
• green area maintenance with tree cutter attachments
• special operations made possible by a wide range of specific solutions for any need

Comfort seat
Verstellbares Lenkrad
Adjustable sunblind
Heating

Touchscreen, 7”
MCTS – Magni Combi Touch System on-board software
LMI – Load Moment Indicator
Onboard and remote integrated diagnostics

Q-Fit standard
Advanced two-line CAN BUS system
Automatic front and rear wheel alignment
Automatic parking brake
External battery cut-off
Electrical system: 12 V – IP67

Warranty: 24 months/2,000 hours